Li-ion battery electric pallet truck is a lithium battery as a power source of handling tools, belongs to a kind of material handling equipment, widely used in large supermarkets, factories, hospitals and other places. Compared with the standing type electric pallet truck, it is more lightweight, flexible, and has less requirements for the channel, which has been widely recognized and liked by customers. This order also comes from the buyback of our Indonesian customers. Let's listen to what the customers think about our products.

Main Advantages:

1. Environmental protection and energy saving: Using battery power supply, does not produce exhaust emissions and noise pollution, friendly to the environment. In contrast, conventional gas turbine trucks use gasoline or diesel, which can emit harmful exhaust fumes and noise.

2. Economy: Electricity is usually cheaper than fuel, and the use of electric trucks can reduce operating costs. Although the purchase cost of an electric carrier may be higher, its maintenance and operation costs are lower in the long run.

3. Easy operation: no need to manually start, fill fuel or change the oil and other operations, just charge can be used. They are usually equipped with a simple control panel to make operation easier and more convenient.

4. Efficiency: It usually has high speed and fast starting ability, which can achieve fast and accurate handling operation. The driving force can also be adjusted by changing the motor speed to meet different handling needs.

5. Low maintenance cost: Compared with the internal combustion engine truck, its maintenance cost is lower. The motor has a long life and does not require regular replacement of oil, air filters and other wearing parts, reducing the frequency and cost of maintenance and maintenance.

6. Safety: Safety systems are usually built in, such as devices to prevent slippage and tipping, and there is no risk of fuel leakage. In addition, the battery of the electric pallet truck is usually safe and reliable, and has functions such as overcharge and over-discharge protection.

Matters Needing Attention:

1. Familiar with the operation manual: Before using the electric truck, carefully read and understand the operation manual of the truck, understand the operation procedures, safety requirements and warning information.

2. Regular maintenance: carry out regular maintenance and maintenance according to the manufacturer's recommendations, including checking the battery status, charger, brake system, etc., and ensure that the relevant equipment is in normal working condition.

3. Safe operation: Operators need to wear personal protective equipment, including safety shoes, helmets and gloves. Follow traffic rules, watch for pedestrians and other vehicles, and avoid speeding and braking.

4. Regular charging: Charge the battery of the electric carrier in time to ensure sufficient power supply. Do not let the battery completely empty or overcharge, follow proper charging procedures and safety requirements.

5. Material and load restrictions: comply with the material and load restrictions of the truck, do not overload. Balance the load and ensure the stability of the truck. Take care not to suspend or clamp personnel to goods or equipment.

Battery safe operation

1. Fire prevention measures

Do not smoke or use an open flame around the battery.

Flammable materials and working equipment that may produce sparks shall not be placed within a distance of at least 2 meters around the truck that needs to be charged.

The work place must have good ventilation.

Fire extinguishing equipment must be prepared.

2. Prevent electric shock

Battery with high voltage and energy, do not cause short circuit.

Do not let the tool near the battery poles, so as not to cause sparks, resulting in short circuit of the battery.

3. Battery charging precautions

The truck must be parked in a well-ventilated room.

There must be no metal objects on the surface of the battery.

Before you start charging, you must check all cable connections and plug connection parts for visible damage.

Before connecting or disconnecting the charger, make sure that the charger is not connected to the circuit. The safety regulations of battery and charging station manufacturers must be strictly observed.

Check for compliance with charging requirements against precautions.

Unplug the power supply and insert the plug into the appropriate power supply.