Electric forklifts are industrial handling vehicles, which are various wheeled handling vehicles for loading and unloading, stacking and short-distance transportation of palletized goods. It can be widely used in ports, stations, airports, freight yards, factory workshops, warehouses, circulation centers and distribution centers.

How to properly clean the electric forklift in daily life?

1.Routine cleaning every week is important to ensure its reliability. Please unplug the power socket before cleaning to avoid short circuit damage to the electrical system.

2. Remove the attachments on the wheels every day to maintain flexible rotation.

3. Use compressed air to blow off the dust of the motor, do not wash it with a high-pressure washing device, and do not damage the electrical components on the circuit board. to keep the electrical components in position and avoid short circuits

4. After the cleaning is completed, lubricating oil should be added to the parts of the forklift that need to be lubricated according to the lubrication parts table.

Time required for electric forklift maintenance: Because the maintenance interval of electric forklifts is much longer than that of internal combustion forklifts, and the time required for each maintenance is much less than that of internal combustion forklifts, which greatly saves the labor cost required for maintenance , In fact, what is more substantial is that the downtime of the forklift is greatly shortened, so the economic benefits brought by the improved forklift work efficiency are difficult to calculate.

Maintenance cost of electric forklifts: maintenance cycle, the maintenance cycle of electric forklifts is two to three times longer than that of internal combustion forklifts. Usually, the maintenance cycle of internal combustion forklifts is up to 500 working hours, while many electric forklifts can reach 1000 hours. Maintenance intervals of more than one hour.

Maintenance content: The maintenance of electric forklifts is much simpler than that of internal combustion forklifts. Usually, it is only necessary to lubricate some joint movable parts such as gantry bearings, steering axles, etc., mainly for inspection and cleaning, at most every 2000 or 3000 hours. To change the hydraulic oil, gear oil and hydraulic oil filter once, the other materials required are very limited.

In addition to lubrication, the internal combustion forklift needs to replace the engine oil and oil filter every 500 hours at most, and replace the hydraulic oil, oil, transmission oil and these oil filters every 1000 hours. Also replace the belt.