Electric forklift, as a type of new energy forklift, needs to be repaired and maintained on time to extend its service life, and good operation and use skills will also play a vital role in the service life of electric counterbalance forklift. Below, NEOlift will provide our advice on both maintenance and use.

Maintenance Tips

1. Regular cleaning: Keep the vehicle clean, especially the battery, motor and control components. Regularly clean vehicle surfaces and interior parts with cleaner to ensure that no dust, corrosion, or other debris accumulates.

2. Battery maintenance: The battery is the core component of the electric counterweight forklift and needs to be checked and maintained frequently. Keep the battery clean, check the battery electrolyte level, and make sure the fastening screws are secure. Periodically check battery terminals and connectors for corrosion and clean or replace damaged parts.

3. Tire maintenance: Check the tire pressure regularly, and inflate or exhaust as needed. Make sure the tires are not worn, cracked, or otherwise damaged, and replace them as needed. Keep your tires clean and avoid driving on uneven or sharp surfaces.

4. Lubrication and liquid replacement: Regularly check the lubrication points and lubricated to ensure the smooth operation of each moving part. At the same time, the liquid (such as hydraulic oil, gear oil, etc.) is replaced regularly according to the manufacturer's recommendations to ensure the normal operation of the system.

5. Regular inspection: Regular comprehensive inspection, including electrical system, brake system, suspension system, etc. Check whether the wires, sensors and controllers are well connected, whether the braking system is sensitive, and whether the suspension system is loose or damaged.

6. Correct use: Ensure that the user has received appropriate training and strictly follow the instructions in the operation manual. Follow safety rules, such as not overloading, not violently accelerating and braking, and avoiding sudden changes in direction or high speeds.

7. Timely repair: If any fault or abnormality is found, measures should be taken immediately to repair or notify maintenance personnel. Don't overlook minor problems that could lead to more serious damage or danger.

Use Skill

1. Familiar with the joystick and controller: master the function and use of the joystick and controller of the counterweight forklift truck. Learn how to control forward, backward, turn, lift, and lower cargo operations.

2. Load balance: When lifting or lowering the cargo, ensure that the weight of the cargo is evenly distributed on the fork arm of the forklift. Avoid concentrating loads on one side to maintain vehicle stability.

3. Driving stability: During the driving process, pay attention to maintaining the stability of the counterweight forklift. Avoid sharp turns or sudden stops, so as not to cause vehicle imbalance or goods slip.

4. Material stacking skills: Learning the correct stacking skills can improve efficiency and safety. Stack goods neatly to avoid exceeding arm length or height limits. Using the side shift function equipped with the forklift, the position of the cargo can be adjusted to ensure accurate stacking.

5. Pay attention to safety matters: always pay attention to safety matters when using a counterweight forklift. Comply with relevant operating procedures and safety guidelines. Wear personal protective equipment, such as hard hats and goggles. Ensure that the work area is clean and free of obstacles and uneven ground.

6. Regular maintenance: regular inspection and maintenance of the counterweight forklift to ensure its normal operation and safety performance. Pay attention to battery maintenance and charging, check tire wear, and make sure equipment such as brakes and lights are functioning properly.

7. Training and qualification: Before operating the counterweight forklift, receive professional training and obtain the corresponding qualifications and certificates. This will familiarize you with operating techniques, safety precautions, and emergency handling methods.